D2 DIESEL FUEL OIL SPECIFICATIONS
| ARAMETER | SPECIFICATION | STD. METHOD | TYPICAL QUANTITY |
|---|---|---|---|
| Relative Density @ 15 °C, Kg/m3 | Report | IS 1448(P:32) | 855 |
| Flash Point (PMC), °C | 66 Min. | IS 1448(P:21) | 74 |
| Ramsbottom Carbon Residue (RCR), Percent by mass | 2.5 to 15.7 Max | IS 1448(P:25) | 5 |
| 1.50 Max | IS 1448(P:8) | 1.3 | |
| Copper Strip Corrosion, 3 hrs at 100°C | Not Worse than No.2 | IS 1448(P:15) | No.1 |
| Water content % by Vol. | 1.0 Max | IS 1448(P:40) | <0.05 |
| Sediment % by mass | 0.10 Max | IS 1448(P:30) | 0.04 |
| Ash % by mass | 0.02 Max | IS 1448(P:4) | 0.01 |
| Acidity, Inorganic, mg KOH/gm | NIL | IS 1448(P:2) | Nil |
| Sulphur, Total % by Mass | 1.8 Max 12°C | IS 1448(P:33) & P:35 | 1.2 |
| Pour Point, °C | 12°C for Winter, Max 21°C for Summer, Max | IS 1448(P:10) | Minus 3 |
JP54 FUEL OIL SPECIFICATIONS
| Properties | Unit | Specification | Test Method |
|---|---|---|---|
| Density at 15 °C | Kg/m3 | 990 max | ASTM D 1298 |
| Kinematic Viscosity 50C° | cSt | 380 max | ASTM D 445 |
| Pour point | °C | 32 max | ASTM D 97 |
| Flash Point | °C | 60 min | ASTM D 93 |
| Sulfur Content | %Wt | 4.5 max | ASTM D 1552 |
| Water & Sediment | %Vol | 1 max | ASTM D 1796 |
| Calorific Value (Higher) | Mj/kg | 40 min | Calculated |